EasyManuals Logo

Sartorius LC 2201P-00MS User Manual

Sartorius LC 2201P-00MS
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
Over/Under Checkweighing with Additional Requirements
Changing the Tolerance Limits
You can change the over/under tolerances between 0.1% and10%.
Tolerance limits Code
0.1% over/under deviation from the target 4 1 1
0.2% over/under deviation from the target 4 1 2
0.5% over/under deviation from the target 4 1 3
1.0% over/under deviation from the target * 4 1 4
1.5% over/under deviation from the target 4 1 5
2.0% over/under deviation from the target 4 1 6
2.5% over/under deviation from the target 4 1 7
3.0% over/under deviation from the target 4 1 8
5.0% over/under deviation from the target 4 1 9
10.0% over/under deviation from the target 4 1 10
Analog Display
You can use an analog marker (two segments) instead of the bar graph located
below the checkweighing indication.
Analog display Code
Off 8 5 1
Bar graph * 8 5 2
Analog marker 8 5 3
Automatic Data Output
“Acceptable” values can be printed out or transferred automatically. Data are
output once the readout has stabilized within the tolerance limits selected.
Following data output, this function will be blocked until the balance has been
completely unloaded.
Automatic data output Code
On 4 2 1
Off * 4 2 2
* = factory setting
412

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sartorius LC 2201P-00MS and is the answer not in the manual?

Sartorius LC 2201P-00MS Specifications

General IconGeneral
BrandSartorius
ModelLC 2201P-00MS
CategoryScales
LanguageEnglish

Related product manuals