155
Product Order No.
SartoWedge data transfer software YSW01L
enables you transfer the data recorded by your balance
to any PC application program (e.g., Excel).
Memory-resident software (5 KB) for all IBM-compatible
computers that are equipped with a serial interface
and run DOS and Windows.
This application kit includes:
–3
1
/2” program diskette
– interface cable
– adapter (25-pin to 9-pin)
Standard Operating Procedure YSL01D
for optimal use of your balance in quality management systems
PC-compatible interface connector, 9-contact,
incl. 5-contact DIN female connector YDO01ME
for bar code scanner or external PC keyboard
RS-485 interface connector, 12-contact, round
incl. 5-contact DIN female connector YDO02ME
for bar code scanner or external PC keyboard
Universal remote control switch
for remote control of one of the following functions
(configured in the balance Setup menu):
p/r, t, d, F2 key, c
Foot switch with T-connector and three functions YPE01RC
open/close draft shield, tare, print
Foot switch with T-connector YFS01
Hand switch with T-connector YHS02
T-connector YTC01
Filter weighing pan YWP01ME
Weighing bowls and trays
– Stainless steel, 20 g 6003
– Glass, 20 g 6015
– Stainless steel, 300 ml, with pouring spout 6407
Weighing scoops (pure aluminum)
– 2.7 x 4 x 12 mm, approx. 4,5 mg (250 per box) 6565
– 6.5 x 7 x 25 mm, approx. 52 mg (200 per box) 6566
Cable for connecting a separate control panel Available on request
(length: 2.7 m)
Pipette calibration set Available on request
Digital/analog converter YAD01Z
Balance table with natural stone slab inset YWT01
with cast stone slab inset YWT03
Wall console YWT04
Carrying case YDB01ME
To Next Page
Loading...
