Sartorius ME215S - Weighing in Percent Application; Purpose and Features of Weighing in Percent

Purpose
This application allows you to obtain
weight readouts in percent that are in
proportion to a reference weight.
Alternatively, you can have the value dis-
played as a difference in percent
between the weight on the balance and
the reference weight, or as a special
ratio1 or ratio2.
You can use this application in combina-
tion with any program chosen from Appli-
cation 2 (checkweighing, time-controlled
functions) and one from Application 3
(totalizing, formulation, statistics) as well
as with the extra functions.
Features
– Reference percentage “pRef” loaded
from long-term memory when you
turn on the balance
– Automatic initialization of this
application and loading the most
recent reference percentage “pRef”
entered with reference weight “Wxx%”
when you turn on the balance (Setup:
Application parameters: Auto-start
app. when power goes on: On)
– Value displayed as:
– Residual quantity (portion)
– Difference (deviation)
– Ratio1
– Ratio2
depending on the selected Setup
menu code
– Reference percentage “pRef” entered
manually
– Store the current weight as the
reference percentage weight “Wxx%”
for initializing the weighing-in-percent
application program
– Reference weight “Wxx%” entered man-
ually
– Parameter for “Weight storage
accuracy” (rounding-off factor) for
storing the reference weight “W100%”
in percentage calculation can be
configured
– Configuration of decimal places
displayed with a percentage
– If selected in the Setup menu, automatic
output of the reference weight “Wxx%”
and reference percentage in the text
line and via the data interface port after
initialization of the weighing-in-percent
program (Setup: Printout: Application-
defined output: Auto print upon
initialization: All values)
– Toggle the display between percentage
and weight readout by pressing the
Weigh. or Perc. soft key
– Toggle between the weighing-in-percent
program and other applications (e.g.,
checkweighing) by pressing d
Factory Settings of the Parameters
Storage parameter:
Display accuracy
Digits displayed with percentage:
2 digits
Display calculated value: Residue
Soft Key Functions
pRef Store value input as reference
percentage
Wxx% Store input value as reference
sample weight
Perc. Toggle to the weighing-
in-percent application
Restar Start next weighing operation
Weigh Toggle to the weighing
application
Start Store current weight value for
preselected percentage
64
Weighing in Percent B