13
Activating the Service Mode
e Switch the device on and immediately (during the initialization of the device) press ...
) ... briefly to display the menu
k k Select the Setup menu item
) Confirm the setup menu item
1
)
k Select the code menu item
(press key k until the code appears on the display)
) Confirm the code menu item and enter the service password (see Appendix)
Use keys ()k p
) Saving the service password
When the service mode is activated an “S”appears in the top right-hand corner of the
display.
( Return to “Code” in the service mode.
( Return to “Setup” in the service mode.
1
) If a password is requested at this point, enter the service password (see Appendix) and
continue once the service password has been accepted.
To Next Page
Loading...
Need help?
General
