Intended Use
The Midrics
®
1 and 2 indicators are
robust indicators for demanding, daily
quality control. They meet the highest
requirements placed on the accuracy
and reliability of weighing results in the
following areas:
– The food industry
– The pharmaceutical industry
– The chemical industry
– The electronics and metal industries.
Midrics
®
indicators:
– Are robust and durable, thanks to their
stainless steel housing
– Are easy to clean and disinfect
– Are easy to operate, thanks to the
following features:
– Large, backlit display-elements
– Large keys with positive click action
– Can be operated independently of the
weighing platform location
– Have fast response times
– Have a range of interfaces for flexible
use
– Offer optional password-protection
to prevent unauthorized alteration of
operating parameters
Further features (Midrics
®
2):
– Possibility to input tare values via the
number block
– Possibility to assign weigh products
with 4 identifiers (ID)
– Built-in applications program
(applications) for:
– Counting
– Neutral measurement
– Weighing in percent
– Averaging
– Checkweighing
– Classification
– Net-total formulation
– Totalizing
– Automatic initialization when the scale
is switched on
– Automatic taring when a load is placed
on the weighing platform
– Optional remote control using an
external computer
The following symbols are used in
these instructions:
§ Indicates required steps
$ Indicates steps required only under
certain conditions
> Describes what happens after you have
performed a particular step
– Indicates an item in a list
!Indicates a hazard
2
To Next Page
Loading...
Need help?
General
