9
Navigating the SETUP Menu
§ Hold down the L key [ENTER] for longer than 2 sec.
Key Functions in the Setup Menu:
Key Press Briefly Press Longer
L key Menu level: scroll to the right (cyclic) Confirm setting
I key Menu item: scroll upwards –
U key Menu level: scroll to the left (cyclic) Save settings and
exit the setup menu
Parameter Settings (Overview) o Factory Settings
Setup- 1 Weighing
Menu 1.1. Filter adjustment 1.1.1 Very stable Ambient conditions
1.1.2 o Stable Ambient conditions
1.1.3 Unstable Ambient conditions
1.1.4 Very unstable Ambient conditions
1.2. Application filter 1.2.1 Tare
1.2.2 o Dose
1.3. Stability range 1.3.1 1/4 increment step
1.3.2 1/2 increment step
1.3.3 1 increment step
1.3.4 o 2 increment steps
1.3.5 4 increment steps
1.5. Calibration/Linearization: 1.5.1 o Calibration
Key function (CAL) 1.5.2 Linearization (for service only)
1.5.3 Key is locked
1.6. Auto zero 1.6.1 On
1.6.2 o Off
1.7. Weight units 1.7.1 Parts per pound
1.7.2 Gram
5. and 6. are relevant only if interface port is installed:
(refer to the corresponding description of the interface port on the next page)
8. Additonal functions
8.1. Lock key functions 8.1.1 All are locked with the exception
of (ON/OFF) and (ZERO) functions
8.1.2 o All unlocked
9. Reset menu
9.1. Reset 9.1.1 Factory settings
9.1.2 o Do not reset
Menu Settings
To Next Page
Loading...
