Sartorius QC15DCE-S - Additional Functions and Reset Options

Universal Switch
Code
p/p key 8 4 1*
=/z key 8 4 2
g/W key 8 4 3
o/t key 8 4 4
u/w key 8 4 5
z/T key 8 4 6
S/a key 8 4 7
Blocked 8 4 8
Power-on Mode Code
e/o key active,
electronics on,
display blank 8 5 1
e/o key active,
electronics off, w/AC
power: backlighting
off after 2 min. 8 5 2*
e/o key active,
electronics on, display
blank, w/battery power:
auto shut-off
off after 2 min. 8 5 3
Auto shut-off after 2 min. 8 5 4
Line Feed Code
No line feed 7 8 1
Line feed – 1 line 7 8 2
Line feed – 2 lines 7 8 3
Line feed – 3 lines 7 8 4*
Additional Functions
Menu access Code
Accessible
“-C-” in display 8 1 1*
Blocked
“-L-” in display 8 1 2
Acoustic Signal
(Beep Tone) Code
On 8 2 1*
Off 8 2 2
Key Functions Code
Accessible 8 3 1*
Blocked 8 3 2
Display Backlighting
Code
On 8 6 1
Off 8 6 2
Auto shut-off after 2 min 8 6 3*
Automatic Power – Down of Scale
Code
On 8 7 1
Off 8 7 2*
Reset Function
This function enables you to reset all
menu codes back to the original
factory settings, which are identified
here by an “*”.
Reset function Code
On 9 – – 1
Off 9 – – 2*
*= factory setting