Installation and Operating Instructions Secura, Quintix, Practum 9
Specifications
AC Adapter
Sartorius AC adapter 6971790 plus exchangeable country-specific mains plug adapter
Primary 100 – 240 V~, ±10%, 50 – 60 Hz, 0.2 A
Secondary 15 V DC, ± 5%, 530 mA (max.) / 8 W (max.): 0 to +40°C and
15 V DC, ± 5%, 330 mA (max.) / 5 W (max.): 0 to +50°C
Further data Protection class II in accordance with EN/IEC 60950-1, up to 3000 m above sea level, IP40 in
accordance with EN/IEC 60529
Balance
Power supply Only via Sartorius AC adaptor module 6971790 (package 6971790 or 6971791)
Input voltage 12.0–15.0 VDC
Power consumption 2 W (typically)
Ambient Conditions
These specifications apply under the following ambient conditions:
Environment For indoor use only
Ambient temperature * +10°C to +30°C
Operational capability Guaranteed between +5°C and +45°C
Storage and shipping –10°C to +60°C
Elevation Up to 3000 m above sea level
Relative humidity ** 15% to 80% for temperatures up to 31°C, non-condensing, decreasing linearly up to 50% relative
humidity at 40°C and 20% at 50°C
Safety of Electrical Equipment As per EN 61010-1 / IEC 61010-1
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 1: General requirements
Electromagnetic Compatibility As per EN 61326-1 / IEC 61326-1
Electrical equipment for measurement, control, and laboratory use -
EMC requirements – Part 1: General requirements
Defined immunity to interference Suitable for use in industrial areas
Interference emission Class B (suitable for use in residential areas and areas that are connected to a low voltage network
that also supplies residential buildings). The device can therefore be used in both areas.
Standard Equipment
Selectable weight units
1
) Gram, kilogram, carat, pound, ounce, troy ounce, Hong Kong tael, Singapore tael, Taiwan tael,
grain, pennyweight, milligram, parts per pound, China tael, mommes, Austrian carat, tola, baht,
mesghal and Newton
Available application programs Secura models: counting, weighing in percent, density determination, peak hold, unstable
condition, checkweighing, mixing, totalizing, statistics, conversion, SQmin, and Identifiers
Quintix models: counting, weighing in percent, density determination, peak hold, unstable
condition, checkweighing, mixing, totalizing, statistics, conversion
Practum models: counting, weighing in percent, density determination, peak hold, unstable
condition, checkweighing
CE model balances verified for use in legal metrology comply with the requirements of Council Directive 2009/23/EC,
EN 45501:1992 and OIML R76:2006.
* For use in legal metrology in accordance with EU requirements, refer to the information on thebalance.
** For use in legal metrology in accordance with EU requirements, the legal regulations apply.
1
) Depending on the country-specific model version, not all weight units listed may be available.
General Data Model-specific data on page 80
To Next Page
Loading...
Need help?
General
