77
4. Close the top cover and tear off
the surplus paper to complete the
installation.
Printing a self-test page is used to
check whether the printer is operating
in the normal mode.
1. Make sure that the paper roll has been
loaded and the top cover has been
closed.
2. Press and hold the feed button while
turning on the printer. After hearing the
printer start to feed paper, release the
button; the printer will now print a self-
test page. Manually tear off the paper
after the printer stops feeding paper.
5 Printing a
Self-test Page
6 Operating
FEED Button
If you press the FEED button for a short time, the printer
will feed one line at a time. If you hold the FEED button,
the printer will feed paper constantly.
Name Status Explanation
POWER LED (green) Always on The power supply of the printer is
normal.
Off Printer is turned off.
ERROR
LED
(red)
Off Printer is normal.
Out of paper.
Voltage is abnormal.
Print head is overheating.
www.scaleman.com is your source for Sartorius Laboratory Products
www.balances.com offers Sartorius Lab Balances at great prices
To Next Page
Loading...
