ESPT JARUEN DE KO ESPT JARUEN DE KO
03025/03026
- 03 -
17
Operating instruction
Note: To avoid electric shock or damage
to the meter, never apply a voltage
greater than 1000Vdc to the input end.
。
Note: To avoid electric shock or
damage to the meter, never apply a
voltage greater than 750Vac to the
input end.
Measuring DC voltage Measuring AC voltage
AC/DC measurement (DC only for 03026)
Note: Ensure the conductor to be measured is clamped in the center of the head. The
meter can only measure one conductor at a time.
If the meter reading is not zero during DC measurement, please press the "REL/ZERO"
button to make the meter display zero.
To Next Page
Loading...
