<< Operating Instructions SATA adam 2 >>
EN
VII.2
<< Operating Instructions SATA adam 2 >>
4. Technical Design of the SATA adam 2 [1]
[1-1] SATA adam 2 dock connec-
tion module for SATA paint
spray guns
[1-2] SATA adam 2 mini dock
connection module for SATA
minijet paint spray guns
[1-3] Regulation wing
[1-4] Ball valve
[1-5] SATA adam 2 display
[1-6] Special O-ring
[1-7] Locking clip
[1-8] Digital display
[1-9] O-ring | Please regularly
lubricate with high per-
formance grease (Art.
No. 48173) - sample tube
included in scope of delivery.
5. Intended Use
The SATA adam 2 and the SATA adam 2 mini as well as the SATA adam 2
display in combination with the respective SATA adam 2 dock connection
module are designed for adjustment and control of the inlet pressure of a
SATA paint spray gun.
Warning!
• The user is responsible for any damage and accidents caused by im-
proper use!
6. Safety Instructions
6.1. General Safety Instructions
Warning! Attention!
• Before using the device, please read all safety instructions as well as
the operating instructions of the paint spray gun carefully. Safety instruc-
tions and indicated safety measures are mandatory.
• Please keep all enclosed documents and make sure that the device is
handed over only together with these documents.
• Reading the operating instructions of the respective SATA paint spray
gun is mandatory!
To Next Page
Loading...
Need help?
General
