<< Operating Instructions SATA adam 2 >>
EN
VII.10
<< Operating Instructions SATA adam 2 >>
Art. No.
Description
162164 5x locking clip
162172 5x O-ring
162081 5x dock protect
15. Declaration of Conformity
Manufacturer:
SATA GmbH & Co. KG
Domertalstrasse 20
D-70806 Kornwestheim
We hereby declare that the following product in the version sold by SATA,
due to its conception, design and construction complies with the basic
safety requirements of the directive 94/9/EU including the modications
valid at the time of the declaration, and that it can be used in explosive
areas (ATEX), annex X, B, according to EU directive 94/9/EU.
Product description: .................digital pressure measuring device
Product type: .............SATA adam 2 (mini), SATA adam 2 display
ATEX classification: ........................................ II 2 G Ex ia IIC T4
IECEx label: ................................................IECEx KEM 09.0075
Corresponding EC directive
• EC directive 94/9/EG Geräte und Schutzsysteme zur bestimmungs-
gemäßen Verwendung in explosionsgefährdeten Bereichen (Devices
and protection systems for the intended use in explosive areas).
Applied harmonised norms:
• DIN EN 1127-1:2008 „Explosionsschutz Teil 1: Grundlagen und
Methodik“ (Explosion Protection Part 1: Basics and Methods)
• DIN EN 13463-1:2001 „Nicht-elektronische Geräte für den Einsatz in
explosionsgefährdeten Bereichen - Teil 1: Grundlagen und Anforderun-
gen“ (Non-electronic devices for the use in explosive areas - part 1:
Basics and Requirements)
• DIN EN ISO 12100-1/-2; „Sicherheit von Maschinen, Allgemeine An-
forderungen“ (Operating Safety of Machinery, General Requirements)
Applied national norms:
• DIN 31000:1979 „Allgemeine Leitsätze für das sicherheitsgerechte
To Next Page
Loading...
Need help?
General
