BG0635 REV.A1 ENGLISH PRO PM335 Quickstart www.satec-global.com
PRO PM335 Quick Start Manual
This guide instructs the user on installation, wiring, configuring and operating the PM335
multi-meter. This guide does not substitute the full user manual or the detailed safety
instructions. to download the manual and other related material, please visit our website:
www.satec-global.com
Warning! Only a licensed electrician may perform installations and wiring of the
PM335.
Figure 1: PM335 front panel
INSTALLATION
The PM335 is designed for 4-inch round / 92x92mm square panel mounting.
Please note to leave room for future expansion: when a basic units (no modules), it is
recommended to maintain a minimal gap of 30-100mm to the right (when facing front panel)
of the unit, allowing future installation of additional detachable SATEC modules (depending on
number of added modules: 17.8mm each).
To Next Page
Need help?
General
