SatLab SL7 - Control Cover

SL7 GNSS RTK System User Manual
www.satlab.com.se 13
Figure 2-1-3
1. Power button 2. Speaker 3. Connection screw
4. Camera 5. Type-C USB interface 6. SMA antenna interface
◇
Type-C USB interface: to upgrade the firmware and download static data.
◇
SMA antenna interface: connect the radio antenna while using the Internal UHF mode.
◇
Protective plug: used for dustproof and waterproof sockets.
Notice:
1. If you don’t use the SMA antenna interface and USB interface, please cover the rubber plug to
protect them from dust and water.
2. When the speaker is flooded, the sound may be silent or hoarse, but it will return to normal
after it has dried.
2.1.3 Control cover
The control panel includes a satellite light, power button and data light.
Figure 2-1-4
1. Satellite LED 2. Data LED 3. Power button
1
2
3
6
4
3
5
2
1