2.5 Tilt Survey
2.5.1 Calibration-free Tilt Survey
Connect the receiver in the Satsurv software and open the Tilt Survey in the option at Survey → Surveying
Configure → Data interface. Click the Tilt Survey icon and follow the prompt on the Satsurv interface to finish
the initialization.
Figure 2-5-1 Tilt Survey Figure 2-5-2 Shake
Shake the receiver back and forth (once every second) for initialization until Shake is marked with
When all of the initialization items are ticked, the receiver prompts “Tilt compensation started” and the tilt
survey icon becomes illuminated. This means that the tilt survey initialization is now complete and you can
perform the tilt survey on the receiver.
To Next Page
Loading...
