SatLab SL7 - Technical Parameters

SL7 GNSS RTK System User Manual
www.satlab.com.se 34
3.1 Technical Parameters
Table 3-1-1 Technical Parameters
Configuration
Detailed Indicators
GNSS
configuration
Channels
1408
Satellite signals are
tracked
simultaneously[1]
BDS: B1I, B2I, B3I, B1C, B2a, B2b*
GPS: L1C/A, L1C, L2P(Y), L2C, L5
GLONASS: L1, L2
GALILEO: E1, E5a, E5b, E6*
QZSS: L1, L2, L5, L6*
IRNSS: L5*
SBAS: L1C/A, L5
Output format
ASCII: NMEA-0183, Binary data
Positioning output
1~20Hz
Static data format
GNS and RINEX
Message type
RTCM2.X, RTCM3.X
Network mode
VRS, FKP, MAC;
Supports NTRIP protocol
System
configuration
Operating system
Linux system
Data storage
8G internal storage;
Supports automatic cyclic storage of static data
Accuracy and
reliability[2]
RTK position precision
Horizontal: ± (8+1×10
-6
D) mm
(D is the distance between measurement points)
Vertical: ± (15+1×10
-6
D) mm
(D is the distance between measurement points)
Static measurement
precision
Horizontal: ± (2.5+0.5×10
-6
D) mm
(D is the distance between measurement points)
Vertical: ± (5+0.5×10
-6
D) mm
(D is the distance between measurement points)
Horizontal: ± 0.25m+1ppm