Digital Satellite Finder
19
○ Mode: C,Drive to stored position; move the cursor to GO,
then press OK key, the motor will go to position of we saving
in mode A Position.
○ Mode: D, Drive to Satellite move the cursor to GO, then press
OK key, the motor will go to position of auto calculate.
D1 Direction:Press ◄► key to move direction to west or east.
○ Mode: E, Set East Limit or Set west Limit, limit the motor
move to east or to west.
E1 Direction:Press ◄► key to move direction to west or east.
E2 Store: save the satellite position of A2
○ Mode: F, Set Limit enable or disable, set the limit enable or
disable,
8, Unicable: Press ◄► key to select Unicalbe then press OK key
into the Unicable setting.(PIC 23)
Transponder: press ◄► key to change the current TP.
IF Channel: press ◄► key to change change SCR channel.
To Next Page
Loading...
