98
• This mode shows useful information about the current cursor location, such as the current
grid reference and latitude and longitude.
• Set Marker - Used to get a straight-line distance and bearing between the marker and the
current cursor location.
• Set GoTo - Sets a single-leg route between your current/last known GPS location and the
selected GoTo position.
• Map Packs - Displays the map(s) available on the Map card in the device.
• Press Next to go to the Trip Log.
• Records and displays key statistics such as distance travelled, speed, and so on, with a handy
elevation prole of the trip.
• Remember to press Start to begin the TRIP LOG; this option will then change to Stop.
The Trip Log will now start recording your trail, and will leave a trail of red dots on the GPS
Map mode.
• When nished, or when pausing for rest, press Stop to stop the TRIP LOG.
• Menu - Various options to convert and save your route data.
• Track / Trail - A “snail” Trail is the line of red dots recording where you HAVE been. A Track is
a set of saved data that will display in the ROUTES MENU and can be recalled at any time to
follow on the map screen as a coloured route.
Primary Screen: TRIP LOGPrimary Screen: POSITION INFO
Next
To Next Page
Loading...
