Need help?Do you have a question about the satmap active12 and is the answer not in the manual?
General| Battery Life | Up to 16 hours |
|---|---|
| Water Resistance | IPX7 |
| GPS | Yes |
| Barometric Altimeter | Yes |
| Electronic Compass | Yes |
| Connectivity | USB, Bluetooth |
| Display | 3.5-inch touchscreen |
| Memory | 8GB internal |
| GPS Accuracy | 5m |
| GPS Receiver | High sensitivity |
| Maps | Preloaded world base map, optional regional mapping available |
Essential guidelines for maintaining the unit's functionality and longevity in outdoor conditions.
Details on obtaining satellite lock and factors affecting GPS signal accuracy.
Instructions for protecting the unit in rain, snow, and dusty conditions.
Steps to take if the unit is submerged in water to prevent damage.
Guide to powering the unit on, off, and using the hibernate function for power saving.
Explanation of how to use the planning mode for route creation and map study.
Displays your location and mapping. Features map toggling, data boxes, and orientation options.
Allows map manipulation, route planning, and access to other menus.
Records trip data, distance, time, and displays elevation profiles.
Shows satellite acquisition status, signal strength, and accuracy.
Provides access to all device settings for customization and optimization.
Options for managing battery life, including screen turn-off and power saving modes.
Configuration for Bluetooth connectivity with sensors and other devices.
Procedure for calibrating the electronic compass for accurate readings.
Lists all saved routes and provides options for managing them.
Instructions on how to activate and follow a planned route on the device.
Allows editing of route titles, comments, waypoints, and other properties.
Access to manage POIs, AOIs, LOIs, Grids, and IOIs.
Organizes all Objects of Interest, allowing viewing and editing.
Introduction to Points of Interest and how they can be added and used.
Step-by-step guide to creating a Point of Interest using map coordinates.
Displays detailed information about a selected Point of Interest.
Defines Areas of Interest and their uses for marking areas or measuring.
Process for creating an Area of Interest by laying down points on the map.
Shows details of an Area of Interest, including grid reference and description.
Explanation of Lines of Interest for plotting boundaries or alternative routes.
Displays details of a Line of Interest, including its length and description.
Introduction to Grids, used for dividing areas into searchable segments.
Guide to creating a grid by setting the centre point on the map.
Shows details of individual AOIs within a grid.
Definition of Items of Interest and their use for non-geographic digital information.
Procedure for creating and naming an Item of Interest directly on the unit.
Displays the description and details of an Item of Interest.
Explains setting a target point (GoTo) or reference point (Marker) for navigation.
Instructions for setting GoTo points or Markers using grid coordinates.
To Next Page
