To adjust for compass variance:
1. Find your current location and variance zone
number on the following zone map.
2. Press and hold the COMP button for five seconds
until a zone number appears in the display.
3. Press the COMP button on the bottom of the mirror
until the new zone number appears in the display.
After you stop pressing the button, the display
will show a compass direction within a few seconds.
Cleaning the Mirror
Use a paper towel or similar material dampened with
glass cleaner. Do not spray glass cleaner directly on the
mirror as that may cause the liquid cleaner to enter
the mirror housing.
Outside Remote Control Mirror
To adjust the driver’s side outside mirror, move the
knob located on the driver’s door. To adjust the
passenger’s side outside mirror, move the knob located
on the passenger’s door. Adjust each mirror so you
can see the side of your vehicle and the area beside and
behind your vehicle.
2-38
carownersmanual.net
carownersmanual.net
To Next Page
Loading...
Need help?
General
