Shoulder Belt Height Adjuster
Before you begin to drive, move the shoulder belt
adjuster to the height that is right for you.
To move it down, press down on the indented part of
the height adjuster and move the height adjuster to the
desired position. You can move the adjuster up just
by pushing up on the bottom of the height adjuster. After
you move the adjuster to where you want it, try to
move it down without pressing down on the indented
part to make sure it has locked into position.
Adjust the height so that the shoulder portion of the belt
is centered on your shoulder. The belt should be
away from your face and neck, but not falling off your
shoulder.
1-19
carownersmanual.net
carownersmanual.net
To Next Page
Loading...
Need help?
General
