Speed Rating: An alphanumeric code assigned to
a tire indicating the maximum speed at which a
tire can operate.
Traction
: The friction between the tire and the
road surface. The amount of grip provided.
Tread
: The portion of a tire that comes into
contact with the road.
Treadwear Indicators
: Narrow bands, sometimes
called wear bars, that show across the tread of
a tire when only 1/16 inch (1.6 mm) of tread
remains. See When It Is Time for New Tires
on page 5-59.
UTQGS (Uniform Tire Quality Grading
Standards)
: A tire information system that
provides consumers with ratings for a tire’s
traction, temperature, and treadwear. Ratings
are determined by tire manufacturers using
government testing procedures. The ratings are
molded into the sidewall of the tire. See Uniform
Tire Quality Grading on page 5-62.
Vehicle Capacity Weight
: The number of
designated seating positions multiplied by
150 lbs (68 kg) plus the rated cargo load.
See Loading Your Vehicle on page 4-22.
Vehicle Maximum Load on the Tire
: Load on
an individual tire due to curb weight, accessory
weight, occupant weight, and cargo weight.
Vehicle Placard
: A label permanently attached
to a vehicle showing the vehicle’s capacity weight
and the original equipment tire size and
recommended inflation pressure. See “Tire and
Loading Information Label” under Loading Your
Vehicle on page 4-22.
Inflation - Tire Pressure
Tires need the correct amount of air pressure to
operate effectively.
Notice: Do not let anyone tell you that
under-inflation or over-inflation is all right.
It is not. If your tires do not have enough air
(under-inflation), you can get the following:
• Too much flexing
• Too much heat
• Tire overloading
• Premature or irregular wear
• Poor handling
• Reduced fuel economy
5-52
To Next Page
Loading...
Need help?
General
