Removal and Installation of the Sealant
Canister
To remove the sealant canister, do the following:
1. Unlock the air only hose from the sealant canister
by pulling the lever up.
2. Unwrap the sealant/air hose from the compressor.
3. Turn the sealant canister so the inflator filling hose
is aligned with the slot in the compressor.
4. Lift the sealant canister from the compressor and
replace with a new sealant canister. See your
dealer/retailer for more information.
5-78
To Next Page
Loading...
