Sauder 158085 - Page 7

4
158085
BLACK 9/16” LARGE HEAD SCREW
(14usedinthisstep)
- Position the RIGHT END (A) and LEFT END (B) as shown.
- Fasten fourteen ANGLE BRACKETS (P) to the RIGHT END (A) and LEFT END (B) as shown. Use a BLACK
9/16” LARGE HEAD SCREW through each BRACKET and into the pre--drilled holes in the ENDS.
NOTE: Be sure to position the BRACKETS as shown. Be sure the edges of the BRACKETS are even
with the edges of the ENDS. Follow the enlarged diagrams closely.
ANGLE
BRACKET (P)
ANGLE
BRACKET (P)
RIGHT
END (A)
LEFT
END (B)
www.sauder.com/services