Sauder 402159 - Step 13: Keyboard Shelf Assembly

å
Fasten the KEYBOARD BACK (X) to the KEYBOARD SHELF (U).
Use four BLACK 1-1/2" FLAT HEAD SCREWS (S2).
å
Fasten the KEYBOARD SIDES (V and W) to the
KEYBOARD SHELF (U) and KEYBOARD BACK (X). Use six
BLACK 1-1/2" FLAT HEAD SCREWS (S2).
å
Fasten the KEYBOARD DRAWER SLIDES (A1 and B1) to
the KEYBOARD SHELF (U). Use four BLACK 1/2" FLAT
HEAD SCREWS (S7).
Step 13
BLACK 1-1/2" FLAT HEAD SCREW
(10 used in this step)
S2
BLACK 1/2" PAN HEAD SCREW
(4 used in this step)
S7
U
U
V
W
X
A1
B1
Page 17
www.sauder.com402159