Sauder 402159 - Step 18: Small Drawer Front Assembly

å
Fasten a HANDLE (L1) and two HANDLE BASES (M1) to
a DRAWER FRONT (O). Use two BLACK 9/16" MACHINE
SCREWS (S8).
å
Repeat fastening the HANDLES (L1) and the HANDLE
BASES (M1) to the remaining DRAWER FRONTS (O).
å
Fasten two DRAWER FRONTS (O) to a LARGE DRAWER BOX
FRONT (J). Use four BLACK 1" PAN HEAD SCREWS (S3).
å
NOTE: Be sure the DRAWER BOTTOM (S)
inserts into the groove in the lower
DRAWER FRONT (O).
å
Repeat fastening two DRAWER
FRONTS (O) to a LARGE DRAWER
BOX FRONT (J) two times.
Step 18
Page 22 www.sauder.com 402159
BLACK 1" PAN HEAD SCREW
(12 used in this step)
S3
O
O
O
L1
M1
M1
J
1/8" (3mm)
BLACK 9/16" MACHINE SCREW
(12 used in this step)
S8
L1
M1
S