Sauder 411606 - Page 2

Table of Contents Assembly Tools Required
2-3
4
5-17
18-20
21-23
24-26
27
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
411606 www.sauder.com/servicePage 2
Part Identifi cation
å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
A3 RIGHT END (1)
B3 LEFT END (1)
C3 UPRIGHT (1)
D3 DESK TOP (1)
E2 TOP (1)
F3 BOTTOM (1)
G3 MODESTY PANEL (1)
H3 SMALL BACK (1)
I BACK (1)
J2 ADJUSTABLE SHELF (1)
K2 DRAWER FRONT (1)
D20 RIGHT DRAWER SIDE (1)
D21 LEFT DRAWER SIDE (1)
D148 DRAWER BACK (1)
D951 DRAWER BOTTOM (1)