Sauder 416407 - Assembly Preparation; Tools and Part Identification

No. 2 Phillips Screwdriver
Tip Shown Actual Size
Table of Contents Assembly Tools Required
Hammer
Not actual size
Skip the power trip.
This time.
2-3
4
5-18
19-21
22-24
25-26
27
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Français
Español
Safety
Warranty
416407 www.sauder.com/servicePage 2
A2 RIGHT END (1)
B2 LEFT END (1)
C2 TOP (1)
D BACK (1)
D36 RIGHT DRAWER SIDE (4)
D37
LEFT DRAWER SIDE (4) - 1 with label
D175 DRAWER BACK (4)
D982 DRAWER BOTTOM (4)
E BACK BRACE (1)
F FRONT BRACE (1)
G BRACE (1)
H DRAWER FRONT (4)
I BASE (1)
J TOP MOLDING (1)
M67
DRAWER BRACE (4)
(Hidden part using recycled
material. Color may vary.)
å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
Now you know
our ABCs.
Part Identifi cation