Sauder 416407 - S Gold 5;16 Flat Head

Step 12
416407 www.sauder.com/servicePage 16
å
Fasten a DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D36) and a DRAWER
LEFT (35AD) to the LEFT DRAWER SIDE (D37). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #2.
å
NOTE: The glides are not intended to rotate.
å
Now, fasten a KNOB (91K) to the DRAWER FRONT (H). Use a BLACK 1-1/8" PAN
HEAD SCREW (9S).
å
Repeat this step for the other drawers.
1
2
1
2
D36
D37
H
91K
BLACK 1-1/8" PAN HEAD SCREW
(4 used for the KNOBS)
9S
Glide end
Glide end
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
3S
VIEW THE DRAWER GLIDE VIDEO