Sauder 417771 - Black 1-9;16 Flat Head Screw

Step 8
å
Fasten the DRAWER SIDES (D42 and D43) to the
DRAWER BACK (D154). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
å
Slide the DRAWER BOTTOM (D960) into the grooves in
the DRAWER SIDES and DRAWER BACK.
417771 www.sauder.com/servicesPage 12
D42
D960
D43
D154
D42
D43
D154
Groove
Finished
surface
With the palm of
your hand, tap the
DRAWER BOTTOM
into the grooves.
Be sure the DRAWER
BOTTOM inserts into the
DRAWER BACK groove.
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
30S