Sauder 417771 - Gold 5;16 Flat Head Screw; Silver 1;4 Machine Screw

Step 10
417771 www.sauder.com/servicesPage 14
å
Fasten a DRAWER RIGHT (35GC) to the DRAWER RIGHT
SIDE (D42) and a DRAWER LEFT (35GD) to the DRAWER
LEFT SIDE (D43). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #3.
å
Fasten the PULL (98K) to the DRAWER FRONT (K).
Use two WASHERS (10I) and two SILVER 1/4"
MACHINE SCREWS (61S).
1
2
3
1
2
3
Roller end
Roller end
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
3S
SILVER 1/4" MACHINE SCREW
(2 used for the PULL)
61S
98K
10I
K
D42
D43