Sauder 419119 - Page 10

å
Fasten the SHELF (H) to the LEFT END (B). Tighten two
HIDDEN CAMS.
å
Fasten the SHELF (H) to the SMALL UPRIGHT (E). Use
two BLACK 1-7/8" FLAT HEAD SCREWS (2S).
å
Slide the SHELF MOLDING* (T) onto the notched edge of
the SHELF (H).
å
*U.S. Patent No. 5,499,886
Step 6
419119 www.sauder.com/servicesPage 10
Arrow
Minimum
190 degrees
Maximum
210 degrees
Notched edge
B
H
Surface with
HIDDEN CAMS
T
Slide the SHELF MOLDING (T)
onto the notched edge.
BLACK 1-7/8" FLAT HEAD SCREW
(2 used in this step)
2S
E