Sauder 419188 - Assembly Step 3: Top and Valance Attachment; Attach Valances to Top Panel

FRONT
FRONT
F
R
O
N
T
å
Fasten the VALANCES (K) to the TOP (D). Use eight 1-1/2"
FLAT HEAD SCREWS (13).
Step 3
D
K
Some assembly
(and snacks) required.
Page 7
www.sauder.com419188
1-1/2" FLAT HEAD SCREW
(8 used in this step)
13
Finished surface
K
D
Unfi nished surface
1
st
2
nd
This arrow should
be pointing up.
This arrow should
be pointing down.