Sauder 419188 - Skirt

Step
å
Fasten the LEFT END (B) to the TOP (D), BOTTOM (E),
SHELF (F), and VALANCES (K). Use thirteen 1-1/2" FLAT
HEAD SCREWS (18).
å
Fasten the LEFT END (B) to the SKIRT (L). Use a 1/2" PAN
HEAD SCREW (18) through the ANGLE BRACKET on the
SKIRT and into the LEFT END.
Step 7
E
F
K
L
D
Edge with
HINGE BRACKETS
B
Hey! It's starting to look
like something!
1-1/2" FLAT HEAD SCREW
(13 used in this step)
13
1/2" PAN HEAD SCREW
(1 used in this step)
18
Page 11
www.sauder.com419188
K
Finished surface