Sauder 423033 - Step 8: Secure Base and Brackets

Step 8
423033 www.sauder.com/servicesPage 12
å
Fasten fi ve ANGLE BRACKETS (44G) to the LOWER ENDS (C and D) and
BOTTOM (F). Use fi ve BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure the ANGLE BRACKETS are even with the edges of the
LOWER ENDS and BOTTOM.
å
Fasten the BASE (M48) to the LOWER ENDS (C and D) and BOTTOM (F).
Use fi ve BLACK 9/16" LARGE HEAD SCREWS (1S).
C
D
F
44G
44G
44G
BLACK 9/16" LARGE HEAD SCREW
(10 used in this step)
1S
Finished surface
M48
Wide edge