å
Fasten the UPRIGHT (C) to the TOP (F). Tighten two HIDDEN CAMS.
å
Insert four METAL PINS (1R) into the UPPER UPRIGHTS (D).
å
Insert the METAL PINS (1R) in the end of the UPPER UPRIGHTS (D)
into the holes in the TOP (F).
Step 5
414726www.sauder.com/services
Page 9
F
1R
Surface with
more holes
D
D
C
Surface with
HIDDEN CAMS
1R
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
Finished edge
Finished edge
Long fi nished edge
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
To Next Page
Loading...
