Step 8
å
First, fi ll the four holes in the edge of the LEFT REAR LEG (X)
1/4 to 1/2 full with GLUE (177M). Then, insert the WOOD
DOWELS in the ENDS (B and C) and BRACE (I) into the holes of
the LEG. Wipe away the excess GLUE.
å
NOTE: Be sure the CAM SCREWS insert into the holes in the
short edges of the LOWER LEFT END (C) and BRACE (I).
å
Fasten the LEFT REAR LEG (X) to the LOWER LEFT END (C)
and BRACE (I). Tighten two HIDDEN CAMS.
å
Repeat this step for the LEFT FRONT LEG (V) making sure all
HIDDEN CAMS are tight.
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
V
I
C
B
X
Angled edge
Angled edge
Page 13
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely di cult.
Caution
!
177M
Fill the holes 1/4 to 1/2 full with GLUE.
To Next Page
Loading...
