å
Place your unit into its fi nal position against a wall.
å
Fasten the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (1S) into the top of the
unit and a BLACK 1-7/8" FLAT HEAD SCREW (2S) into a stud in your wall.
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice
in the ENDS (A and B). Set the ADJUSTABLE SHELF (G) onto the METAL PINS.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
Step 12
411591 www.sauder.com/servicesPage 16
And to celebrate, why not share your success story?
(4 used)
2R
1R
1G
1S
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
2S
A
B
G
60 lbs.
25 lbs.
50 lbs.
To Next Page
Loading...
