Sauder Transit 414417 - Step 15: Stand Unit and Attach Moldings; Stand Unit Upright; Fasten Uprights to Lower Top; Attach Lower Molding

å
Carefully stand your unit upright.
å
Fasten the UPRIGHTS (C and D) to the LOWER TOP (F2). Use
four BLACK 1-7/8" FLAT HEAD SCREWS (2S).
å
Fasten the LOWER MOLDING (Y) to the DESK FRAMES (V). Use
two BLACK 3/4" PAN HEAD SCREWS (with fl at end) (90S).
Step 15
414417www.sauder.com/services
Page 19
Y
V
V
F2
C
D
BLACK 3/4" PAN HEAD SCREW (with fl at end)
(2 used for the LOWER MOLDING)
90S
Pro Tip: Lift with your
legs. And, you know,
your arms.
BLACK 1-7/8" FLAT HEAD SCREW
(4 used in this step)
2S