Saunier Duval THEMACLASSIC C 25 E - Installation - Technical Specifications; Heating and DHW Performance Data; Combustion and Electrical Characteristics

Sanitary
Heating
Electrical characteristics
12
* Ø 130 mm with adapter
Combustion
INSTALLATION
CO (ppm o mg/kW/h) 32/34 73/78 60 32/34 73/78
(A) 0,45 0,69 0,5 0,45
_
Flue gas flow rate
of combustion
Maximum heat input (Q)
_
_
max power absorbed
automatically variable from… (kW) 8.4 8.9 11.4 to… (kW) 24.6 24.6 23.6
Minimum heat input (Q) (kW) 9.9 10.6
12.5 Heat input temperature (Q) (kW) 26.8 26.5 25.9 Max. flow rate in the circuit (°C) 65 65
65 Min. operating pressure in DHW (l/min.) 1.7 Continuous useful flow rate (T of 30°C) (l/
min.) 12 Min. supply pressure (bar) 0.5 (bar) 10
max pressure of power
100 100
NOx
3,0
5
_
1,7 1,7 12
11,3 0,5 0,5
10
NOx
38,9
15,1
137
(V) 230 230 230 230
C25E F25E F24E CAS25E FAS25E NOx Useful
power
in heating (P) reg. from..(kW) 8.4 8.9 11.4 8.4 to...(kW) 24.6 24.6 23.6 24.6 (kW) 9.9 10.6 12.5 9 ,9 (kW)
26.8 26.5 25.9 26.8 (%) 91.5 92.9 91 91.5 (°C)
87 87 87 87 (°C) 38 38 38 (l) 5 ( l) 110 110
110 110 (bar) 3.0 3.0 3.0 3.0
NOx (ppm o mg/kW/h) 74/130 73/129 20 74/130 73/129
38
_
C25E F25E F24E CAS25E FAS25E
_
100
(m3 /h) 54,4 38,9 44,5 54,4 (g/s) 19,6 15 15
19,6 (°C) 108 137 155 108
Intensity
_
Air flow rate (1013 mbar - 0°C)
110
_
_
6,8
IPX4D IPX4D IPX4D IPX4D IPX4D
230
NOx
_
60 60
C25E F25E F24E CAS25E FAS25E
max temperature capacity Heating control Expansion
vessel capacity Max. of the
installation at 75°C Maximum working
pressure
_
Flue gas evacuation with pipe Ø (mm) 125*
_
5
_
for coaxial systems Ø (mm) _ for coaxial
systems Ø (mm) _
7
_
_
CO2 (%) 5,3
(W) 103 158 122 103
Minimum heat input (Q)
_
C25E F25E F24E CAS25E FAS25E
_
Value of products
5
Air inlet
Electrical protection
Power (P)
_
Smoke temperature
_
5,3
0,69
158
Performance on PCI
_
8,9
24,6
10,6
26,5
92,9
87
_
10
60
Supply voltage
38
_
125*
5
_
7
Technical features
Themaclassic
Machine Translated by Google