4
Operation Precautions
● Specify the proper function parameter data in accordance with the machinery equipment before it starts the
operation, otherwise, it may cause out of control or breakdown.
● Confirm the quick stop function is available before operating the servo motor drive.
● Check whether the servo motor can operate under no-load state first, after that, make the servo motor
running with load to avoid any unnecessary loss.
● Do not turn on or turn off the power frequently, otherwise, it may cause inside overheat of servo motor drive.
Test Run Precautions
● Do not connect with the machine when the servo motor drive is having the test run.
● Fix the servo motor when the servo motor drive is having test run, since the servo motor may cause an impact
to the machine During acceleration and deceleration.
● Please do not perform the switching frequently when it is power on, it is better to keep the frequence of turn
on/off in 2 times per hour and daily with 10 times or below.
Running Precautions
● When the servo motor is running, do not touch any running parts, otherwise, it may cause personal injury.
● When the machinery equipment is running, do not touch the servo motor and servo motor drive, otherwise, it
may cause an electric shock or burn.
● When the machinery equipment is running, do not move the cable, otherwise, it may cause personal injury or
damage to the equipment.
To Next Page
