5
Maintenance and Inspection Precautions
● Do not touch the inside of the servo motor drive and servo motor, otherwise, it may cause an electric shock.
● Do not remove servo motor drive control panel when it is power on, otherwise, it may cause an electric shock.
● Do not touch the wire terminal when the power is turned off in 5 minutes, otherwise, the residual high voltage
may cause an electric shock.
● Do not change the wiring when it is power on, otherwise, it may cause an electric shock.
● Do not remove the servo motor, otherwise, it may cause an electric shock.
Using range Precautions
● This instruction manual is for industrial general purpose, such as the nuclear equipment, aerospace
equipment, life support and maintain equipment and other safety equipment etc., if you have any
requirements, please contact with our company directly
Please do not use it on the equipment that is dangerous to the human safety.
Disposal Precautions
● The electrolytic capacitor on the main circuit and PCB may cause an exposition when burning and the control
panel or plastic parts may cause the poisonous gas, please dispose them as the industrial rubbish.
To Next Page
