SawStop MB-CNS-000 User Manual

SawStop
®
OWNER’S MANUAL
Contractor Saw Mobile Base
Model MB-CNS-000
Lower
Raise
Never place fingers,
toes or other body parts
under the mobile base.
!
WARNING
1. Never place fingers, toes or other
body parts under the mobile base.
2. Always use the saw and the mobile
base on a level surface.
3. Lower the saw before using
saw when it is raised off
4. Lower the saw slo
drop back to.
!
WARNING

SawStop MB-CNS-000 Specifications

General

Brand	SawStop
Model	MB-CNS-000
Category	Saw
Language	English

Summary

Safety Precautions

Prevent Pinching and Crushing

Never place body parts under the saw when it is raised onto the mobile base to avoid severe injury.

Avoid Inclined Surfaces

Do not use or move the saw on inclined surfaces, as it poses a severe injury risk.

Ensure Saw Stability

Verify the saw is fully lowered and stable before operating to prevent unexpected movement.

Disconnect Power Before Moving

Unplug the saw before moving or repositioning to prevent damage to power cords or outlets.

Remove Out-Feed Table

Remove the Out-Feed Table before moving the saw to prevent potential damage to the table.

Unpacking and Component Verification

Installing the Contractor Saw Mobile Base

Operating the Mobile Base

Contractor Mobile Base Exploded View

Contractor Mobile Base Parts List

Warranty Information