Do you have a question about the Scag Power Equipment STT61A-27CH and is the answer not in the manual?
Engine Manufacturer | Kawasaki |
---|---|
Engine Power | 27 hp |
Fuel Type | Gasoline |
Cutting Width | 61 inches |
Deck Type | Fabricated |
Spindle Material | Aluminum |
Blades | 3 |
Transmission Type | Hydrostatic |
Drive | 2WD |
Speed | Up to 10 mph |
Wheel Size (front) | 13 x 6.5-6 |
Wheel Size (rear) | 24 x 12-12 |
Cutting Height | 1.5 - 5 in |
Deck Material | 7-gauge steel |
Fuel Capacity | 12 U.S. gal. |