EasyManua.ls Logo

Scag Power Equipment TURF TIGER STT-29DFI User Manual

Scag Power Equipment TURF TIGER STT-29DFI
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PART NO. 03274 Rev. 2
PRINTED 12/2010
PRINTED IN USA
© 2010
Scag Power Equipment
Division of Metalcraft of Mayville, Inc.
Congratulations on owning a Scag mower! This manual contains the operating
instructions and safety information for your Scag mower. Reading this manual
can provide you with assistance in maintenance and adjustment procedures to
keep your mower performing to maximum ef ciency. The speci c models that
this book covers are listed on the inside cover. Before operating your machine,
please read all the information enclosed.
OPERATOR’S
MANUAL
Turf Tiger
Models: STT52V-27CH
STT61V-27CH
STT61V-27KA
STT61V-29DFI
STT61V-29DFI-LE
STT61V-35BVAC
STT-29DFI
STT-35BVAC

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Scag Power Equipment TURF TIGER STT-29DFI and is the answer not in the manual?

Scag Power Equipment TURF TIGER STT-29DFI Specifications

General IconGeneral
BrandScag Power Equipment
ModelTURF TIGER STT-29DFI
CategoryLawn Mower
LanguageEnglish

Summary

General Information and Safety

Pre-Operation and Mowing Safety Practices

Covers essential safety checks before operation and safe mowing practices.

Slope Operation and ROPS Safety Guidelines

Details safe operation on slopes and the importance of the Roll-Over Protection System.

Seat Belt and ROPS Inspection Procedures

Provides guidance on inspecting ROPS and seat belts for damage and proper function.

Operating Instructions

Controls and Instruments Identification

Identifies and explains the function of all mower and engine controls.

Understanding the Safety Interlock System

Details how the safety interlock system ensures safe operation by preventing unsafe starts.

Starting Engine, Ground Travel, and Steering

Guides on safe engine starting, practicing ground travel, and steering controls.

Engaging Deck, Hillside Operation Safety

Explains how to engage cutter blades and provides critical safety for hillside mowing.

Parking, Post-Operation, and Clog Removal

Covers safe parking, mower cleaning, and clearing discharge chute clogs.

Mowing Tips and Cutting Height Adjustment

Provides recommendations for mowing and detailed steps for adjusting cutting height.

Troubleshooting Cutting Conditions

Troubleshooting Stringers and Streaking

Addresses issues like stringers and streaking, listing causes and recommended cures.

Addressing Uneven Cut and Contour Problems

Covers uneven cuts on flat or uneven ground and sloping ridges across the cutting path.

Resolving Scalping and Step Cut Issues

Focuses on scalping, step cuts, and sloping ridges, identifying causes and cures.

Adjustments

Parking Brake Adjustment Procedure

Provides detailed steps for adjusting the parking brake linkage for proper operation.

Cutter Deck Level and Pitch Adjustments

Details how to check and adjust the cutter deck for side-to-side levelness and front-to-rear pitch.

Cutter Deck Height and Baffle Adjustments

Explains how to set cutting height and adjust the Custom-Cut Baffle for optimal performance.

Maintenance

Maintenance Service Intervals Chart

Provides a chart detailing maintenance procedures and recommended service intervals.

Limited Warranty

Related product manuals