EasyManua.ls Logo

Scag Power Equipment Turf Tiger STT-31EFI-SS User Manual

Scag Power Equipment Turf Tiger STT-31EFI-SS
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PART NO. 03247 Rev. 2
PRINTED 9/2008
PRINTED IN USA
© 2008
Scag Power Equipment
Division of Metalcraft of Mayville, Inc.
Congratulations on owning a Scag mower! This manual contains the operating
instructions and safety information for your Scag mower. Reading this manual
can provide you with assistance in maintenance and adjustment procedures to
keep your mower performing to maximum efciency. The specic models that
this book covers are listed on the inside cover. Before operating your machine,
please read all the information enclosed.
OPERATOR’S
MANUAL
Turf Tiger
Model: STT61V-31EFI-SS
STT-31EFI-SS

Table of Contents

Questions and Answers:

Scag Power Equipment Turf Tiger STT-31EFI-SS Specifications

General IconGeneral
BrandScag Power Equipment
ModelTurf Tiger STT-31EFI-SS
CategoryLawn Mower
LanguageEnglish

Summary

SECTION 2 - SAFETY INFORMATION

2.1 Introduction

Emphasizes operator responsibility for safety, training, and familiarity with controls before operation.

2.2 Signal Words

Explains the meaning and use of signal words (Danger, Warning, Caution) to convey hazard levels.

2.3 Before Operation Considerations

Lists critical checks and precautions required before starting the mower, including children and area clearing.

2.4 Operation Considerations

Provides guidelines for safe operation, including slope limits, speed control, and avoiding hazards.

2.5 Roll-Over Protection System

Details the correct use of the ROPS and seat belt for operator protection in case of a rollover.

2.6 Maintenance Considerations & Storage

Outlines essential safety precautions to follow during maintenance procedures and mower storage.

SECTION 4 - OPERATING INSTRUCTIONS

4.1 Controls And Instrument Identification

Identifies and explains the location and function of all mower controls and instruments for safe operation.

4.2 Safety Interlock System

Explains the function of the safety interlock system and warns against bypassing any switches for safety.

4.3 Initial Run-In Procedures

Provides essential procedures for the initial use and break-in period of the mower, including checks and oil changes.

4.4 Starting The Engine

Details the step-by-step procedure and critical precautions for starting the mower's engine safely.

4.5 Ground Travel And Steering

Explains how to operate the ground travel and steering controls for safe and smooth mower movement.

Reverse Travel

Specific instructions and safety warnings for operating the mower in reverse.

4.6 Engaging The Deck Drive (Cutter Blades)

Describes the correct procedure for engaging and disengaging the cutter deck drive system.

4.7 Hillside Operation

Provides critical safety guidelines and precautions for operating the mower safely on slopes and uneven terrain.

4.8 Parking The Mower

Outlines the correct and safe procedure for parking the mower on a level surface.

4.10 Removing Clogged Material

Explains the safe procedure for removing clogged material from the discharge chute using appropriate tools.

4.13 Adjusting Cutting Height

Explains the procedure for adjusting the mower deck to achieve the desired cutting height.

4.14 Adjusting The Steering Levers

Details the process for adjusting the steering levers to ensure proper operator comfort and control.

4.16 Towing (Optional Hitch Accessory)

Provides essential safety guidelines and recommendations for towing the mower with an optional hitch accessory.

SECTION 5 - TROUBLESHOOTING CUTTING CONDITIONS

SECTION 6 - ADJUSTMENTS

6.1 PARKING BRAKE ADJUSTMENT

Provides a step-by-step guide for adjusting the parking brake linkage to ensure proper operation.

6.2 TRAVEL ADJUSTMENTS

Covers adjustments for neutral creep and tracking alignment to ensure straight mower travel.

NEUTRAL ADJUSTMENT

Details how to adjust the steering controls to prevent the mower from creeping when levers are neutral.

TRACKING ADJUSTMENT

Explains how to adjust steering for straight travel when the mower pulls to one side at speed.

6.4 BELT ADJUSTMENT

Mentions that drive and deck belts are self-tensioning and require periodic checks for alignment and wear.

6.6 CUTTER DECK ADJUSTMENTS

Guides through factory settings for deck level, pitch, and height, with procedures for adjustment.

CUTTER DECK LEVEL

Explains how to check and adjust the cutter deck for side-to-side levelness.

CUTTER DECK HEIGHT

Guides on checking and adjusting the cutter deck height using the control rod for desired cutting height.

SECTION 7 - MAINTENANCE

SECTION 8 - ILLUSTRATED PARTS LIST

Related product manuals