EasyManua.ls Logo

Scag Power Equipment TURF TIGER STT61V-31KB-DF User Manual

Scag Power Equipment TURF TIGER STT61V-31KB-DF
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PART NO. 03278
PRINTED 12/2010
PRINTED IN USA
© 2010
Scag Power Equipment
Division of Metalcraft of Mayville, Inc.
Congratulations on owning a Scag mower! This manual contains the operating
instructions and safety information for your Scag mower. Reading this manual
can provide you with assistance in maintenance and adjustment procedures to
keep your mower performing to maximum efciency. The specic models that
this book covers are listed on the inside cover. Before operating your machine,
please read all the information enclosed.
OPERATOR’S
MANUAL
Turf Tiger
Dual Fuel
Model: STT61V-31KB-DF

Table of Contents

Questions and Answers:

Scag Power Equipment TURF TIGER STT61V-31KB-DF Specifications

General IconGeneral
CategoryLawn Mower
ManufacturerScag Power Equipment
ModelTURF TIGER STT61V-31KB-DF
EngineKawasaki FX921V
Engine Power31 hp
Fuel TypeGasoline
Cutting Width61 inches
Deck TypeFabricated
TransmissionHydrostatic
Fuel Capacity12 gallons
Deck MaterialSteel
Turning RadiusZero Turn
Speed Range0-10 mph
Blade EngagementElectric
Tire Size Front13 x 6.5-6

Summary

Safety Information

Introduction

Emphasizes operator responsibility for safety.

Signal Words

Explains DANGER, WARNING, CAUTION signal words and attention symbol.

Operation Considerations

Details safe operating practices and slope limitations.

Roll-Over Protection System

Instructions on using the ROPS and seat belt.

Operating Instructions

Controls and Instrument Identification

Identifies and explains all controls and gauges.

Safety Interlock System

Explains the function and importance of the safety interlock system.

Starting the Engine

Step-by-step procedure for safely starting the engine.

Ground Travel and Steering

Instructions for operating the drive and steering controls.

Engaging the Deck Drive (Cutter Blades)

Procedure for engaging and disengaging the cutting deck.

Hillside Operation

Specific safety and operational guidance for mowing on slopes.

Adjusting Cutting Height

Step-by-step guide to setting the deck cutting height.

Troubleshooting Cutting Conditions

Adjustments

Travel Adjustments

Adjustments for neutral tracking and straight-line travel.

Cutter Deck Adjustments

Instructions for setting deck level, pitch, and height.

Electric Clutch Adjustment

Procedure to adjust the air gap on the electric clutch.

Maintenance

Hydraulic System

Procedures for checking and changing hydraulic oil and filter.

Engine Oil

Guidance on checking and changing engine oil and filter.

Cutter Blades

Instructions for inspecting, sharpening, and replacing blades.

Limited Warranty - Commercial Equipment

Related product manuals