Scag Power Equipment V-ride User Manual

WWW.SCAG.COM
®
Engine Options:  Kawasaki FX541, air-cooled, twin cylinder, vertical shaft (recoil start)
 Kawasaki FX600, air-cooled, twin cylinder, vertical shaft
 Kawasaki FX691, air-cooled, twin cylinder, vertical shaft
 Kawasaki FX730, air-cooled, twin cylinder, vertical shaft
 Kawasaki FX801, air-cooled, twin cylinder, vertical shaft
Fuel Capacity/Design:  5.5 gallons, single tank with top-mounted fuel shutoff valve (36” & 48”)
 8 gallons, single tank with top-mounted fuel shutoff valve (52” & 61”)
Travel Control: Twin lever steering controls for smooth, precise maneuverability
Ground Speed:  Up to 7.7 mph forward (36” model), 6 mph reverse
 Up to 8.5 mph forward (48” & 52” models), 6 mph reverse
 Up to 11 mph forward (61” model)
Drive Tires:  18 x 8.5 - 8, 4 ply (36” model)
 20 x 10.5 -8, 4 ply (48”, 52” & 61” models)
Caster Tires: 11 x 4 - 5, Flat-Free, semi-pneumatic
Caster Wheel Bearings: Tapered roller bearings
Hydraulic Pumps: Dual Pumps; 10cc displacement (12cc on 61”), Hydro-Gear
Hydraulic Wheel Motors: Dual 12ci heavy-duty motors with extra large shafts
Hydraulic Oil Cooling:  Auxiliary oil cooler (48”, 52” & 61” models)
 Large capacity cooling reservoir (all models)
Hydraulic Oil Filter: 10 micron
Belts: Kevlar cord. Self-adjusting, spring-loaded, self-tightening
Drive/Load Pulleys: Split-steel design -- stronger and lighter weight
than cast-iron
Specications
Stand up for productivity!
(Continued)

Scag Power Equipment V-ride Specifications

General

Fuel Type	Gasoline
Transmission	Hydrostatic
Cutting Height	1.5 in - 5 in
Drive System	Hydrostatic
Deck Material	Steel

Summary

Specifications

Engine Options

Lists available Kawasaki air-cooled, twin-cylinder engines with vertical shaft.

Fuel Capacity/Design

Details fuel tank size and shutoff valve location for different mower models.

Travel Control

Describes the twin lever steering controls for smooth, precise maneuverability.

Ground Speed

Specifies forward and reverse speeds for the 36", 48", 52", and 61" models.

Drive Tires

Lists tire sizes and ply ratings for the drive wheels on different models.

Caster Tires

Specifies the size and type of the semi-pneumatic caster tires.

Caster Wheel Bearings

Details the use of tapered roller bearings for caster wheels.

Hydraulic Pumps

Information on dual pumps and their displacement, including 12cc for 61" models.

Hydraulic Wheel Motors

Describes the dual heavy-duty motors with extra large shafts.

Hydraulic Oil Cooling

Details the auxiliary oil cooler and large capacity cooling reservoir.

Hydraulic Oil Filter

Specifies the micron rating of the hydraulic oil filter.

Belts

Describes Kevlar cord belts with self-adjusting, spring-loaded mechanism.

Drive/Load Pulleys

Details the split-steel design for pulleys, noted as stronger and lighter.

Operator Controls and Features

Instrument Panel

Lists components on the instrument panel: key switch, throttle, choke, etc.

Operator Platform

Describes the heavy gauge steel platform with non-slip footing and suspension.

Operator Comfort Pad

Notes the adjustable comfort pad for different operator sizes and styles.

PTO - Electric Clutch

Specifies the heavy-duty Ogura PTO clutch brake with adjustable air-gap.

Cutter Decks

Details the available Advantage and Velocity Plus decks with anti-scalping design.

Cutter Deck Construction

Describes the Tri-Plate, fully-welded construction for different deck sizes.

Number of Anti-Scalp Wheels

Lists the number and positions of anti-scalp wheels for various deck sizes.

Cutter Deck Spindles

Details Scag Heavy-Duty Spindles with cast-iron housing and tapered bearings.

Cutter Deck Height Adjustment

Describes the hand lever lift with self-locking mechanism for height adjustment.

Cutting Range

Specifies the cutting height range and increment.

Number of Cutter Blades

States that models use 3 Marbain blades.

Total Length

Provides the overall length of the mower for different models.

Total Width

Specifies mower width with discharge chute in mowing and transport positions.

Height

Lists the height of the mower for different models.

Weight

Provides the weight of the mower for different models.

Warranty

Outlines the commercial and non-commercial warranty periods for mower and deck.