SCAN 67 - Electronic Air Control; Setting of Electronic Air Control; Charging of Electronic Air Control

14
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 67\90067041.idw
90067041
Opladning af elektronisk luftregulering
14-03-2022
KEN
Scan 67
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 67\90067041.idw
90067041
Opladning af elektronisk luftregulering
14-03-2022
KEN
Scan 67
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 67\90067061.idw
90067061
Stting of electronic control
16-05-2022
KEN
Scan 67
VÆGT:
AREAL:
422,85 kg
44250721 mm^2
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 67\90067061.idw
90067061
Stting of electronic control
16-05-2022
KEN
Scan 67
VÆGT:
AREAL:
422,85 kg
44250721 mm^2
CHARGING OF ELECTRONIC AIR CONTROL
Before firing in the stove, the electronic air control - Zensoric must be charged by connecting the supplied USB-C charger plug at
the bottom of the side of the stove and the 5V power supply in the socket.
SETTING OF ELECTRONIC AIR CONTROL
The electronic air control on Scan 67 run in 3 levels:
Step 1 - Suitable for softwood, e.g. fir, pine, poplar, willow
Step 2 - Suitable for between hardwoods, e.g. birch, maple, or mixed hardwood
Step 3 - Suitable for hardwood, e.g. beech, ash, oak
The stove is delivered set to Step 2 - which suits the needs of most consumers.
If you want to change the setting, turn the air control button:
Step 1 - Turn clockwise
Step 2 - Set to center position
Step 3 - Turn counterclockwise
When the door is opened, the LED blinks:
1 white blink - Step 1
2 white blink - Step 2
3 white blink - Step 3