EasyManua.ls Logo

SCAN 67 - Cleaning the Glass

SCAN 67
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
CLEANING THE GLASS
Our wood-burning stoves are designed to prevent serious soot build-up on the glass. The best way to achieve this is to make sure
you have a good supply of combustion air. It is also very important that the wood is dry and the chimney correctly dimensioned.
Even if you operate the stove in accordance with our instructions, a slight film of soot may still accumulate on the glass.
You can
easily remove this film by wiping the glass down with a dry cloth and then with a cloth dampened with glass cleaner.
¬ Please note that the glass cleaner is not to get into contact with the gaskets, as this can discolour the glass permanently
¬ The glass cleaner must not come into contact with the painted surfaces, as these can be damaged
DISPOSAL OF STOVE PARTS
Steel/cast iron Send for recycling
Glass Dispose of as ceramic waste
Combustion chamber lining Vermiculite and chamotte are not recyclable. Dispose of as waste.
Baffle plate Vermiculite is not recyclable. Dispose of as waste.
Gaskets Dispose of as waste

Table of Contents

Other manuals for SCAN 67

Related product manuals